Magnetek Enrange CAN-6 Technical Information PDF herunterladen (Seite 34)

Enrange MHR Instruction Manual

August 2014

Page 33 of 57

3.5 CAN CONFIGURATION

Figure 15: CAN Configuration

CAN Configuration: This screen allows the user to make changes to the CAN 1 and CAN 2

settings.

The operator can choose between adjusting the settings for CAN 1 and/or CAN 2. The two CAN

networks are independent from each other.

Use the

and buttons to change between the settings for CAN 1 and CAN 2 and press

the

button to enter the setting options selected.

Press the

button to return to the CAN setting option menu.

The following setting options are used to configure the selected CAN-bus for the application being

used.

• CAN1 Protocol – This setting enables the operator to select the protocol for the CAN 1

network.

The available protocols are as follows:

• J1939

• CAN Open

• Parker ICP

• High Country Tek DN

• OEM Controls

• CAN 1 Baud Rate – This setting enables the operator to select the CAN 1 network

communication speed

The available Baud Rate options are:

• 50k

• 125k

• 250k

• 500k

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Keine Kommentare

Magnetek Enrange CAN-6 Technical Information Seite 34