Magnetek Enrange XLTX Technical Information PDF herunterladen (Seite 31)

Enrange Engineered XLTX Transmitter Instruction Manual

April 2011

Page 31 of 40

Baud Rate

This pull down menu allows the user to modify the communication speed of the CAN bus

network. The user selectable options are 50k, 125k, 250k and 500k.

Identifier

This pull down menu allows the user to select between an 11 bits or 29 bits identifier.

5.4.2 Saving, Downloading, and Reading the Programs and Other RCP Software

Functions

CAUTION

TO PROGRAM OR READ DATA FROM THE XLTX, THE TRANSMITTER MUST BE TURNED

ON.

Saving the Programming File

Once programming is complete click the file tab at the top of the RCP screen to open the file

menu. File locations and names can be selected from this menu. Old files can be deleted, called

up, modified and renamed by this same menu.

Sending a Program to the XLTX

WARNING

AFTER EVERY PROGRAMMING OF THE TRANSMITTER, TEST THE UNIT BY UTILIZING

THE APPROPRIATE RECEIVER. IF THE RECEIVER DOES NOT RESPOND, DO NOT

ACTIVATE A FUNCTION BUTTON! THE TRANSMITTER MAY HAVE INCORRECT

PROGRAMMING. RE-CHECK THE PROGRAMMING IN THE TRANSMITTER AND RETEST.

AFTER ACTIVATION OF THE RECEIVER, FUNCTIONALLY TEST ALL COMMANDS ON THE

TRANSMITTER BY INITIALLY JOGGING THE BUTTONS, THEN WITH A FULL MOVEMENT

BEFORE RETURNING TO SERVICE. FAILURE TO FOLLOW THIS WARNING COULD

RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.

To send a program file to a XLTX Transmitter

1. Plug in the USB programming cable or position.

2. Click the “send” button on the RCP screen. A dialog box will pop up confirming that you

want to proceed. Check the box marked “I accept,” and then click the button “Continue

send to radio.” On-screen prompts will confirm that the receiver has been programmed

or if there are any issues.

3. Data will need to be sent separately for the Unit Info and CAN Configuration screens.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Keine Kommentare

Magnetek Enrange XLTX Technical Information Seite 31